post details NXP-P89V51RD2-Development-Board | Low-Cost-P89V51RD2-Programmer | Price-Cost-P89V51RD2-Board-India
NXP P89V51RD2 Low Cost Development Programmer Board
Paris

Introduction NXP P89V51RD2 Development Board

If you are going to learn microcontrollers then this board is the right choice for you and best solutions based on 8051 intel core. This board will guide you and teach you quick development of applications that can easily run on NXP P89V51RD2 microcontroller. This is a very low cost ISP Programmer can be obtained and can be used to download hex code into NXP Chips through USB Port. The Intel’s core P89V51RD2 microcontroller is an 80C51 microcontroller with 64 kB Flash and 1024 bytes of data internal dedicated RAM. The flash program is used to support both parallel and serial programming through In-System Programming. Parallel programming support widely gang programming for The P89V51RD2 microcontrollers. ISP allowed microcontroller to be programmed inside he hardware. The NXP P89V51RD2 Microcontroller Development Board is designed to interface almost every digital component like DC Motors, L298 IC and relays to control power.

 
The NXP Microcontroller  comes with P89V51RD2 Programmer with Development. Board - With Serial Port. Microcontroller Flash Magic programmer software used to control and program the firmware. Even we can also program 8051 family microcontrollers from Intel like AT89C51/52 AT89S51/52 etc

 
Features Technical Specifications NXP P89V51RD2 Development Board
  • Comes with NXP P89V51RD2 Microcontroller onboard.
  • Includes 10 pin In-System Programming(ISP)  Connector to program MCU
  • Reset Switch Of Microcontrollers.
  • Serial Communication For Max232 for RS232 Protocol
  • Onboard LM7805 power regulator to control the power.
  • Inbuilt USB Power option available
  • Power Indicating red LED
  • It has DS1307 Based Real Time Clock Chip
  • and 24C256 EEPROM as a storage device.
  • It has16x2 LCD to display status of sotware. 
Our Package Contains 
  • 1x Pre company assembled and tested development board 
  • 4x 10 pin FRC Cable for programming microcontroller
  • 1x 3 core Serial Port Cord Cable for RS232 COM1 communication
  • One assembled power supply
  • One 16x2 LCD 
  • One DC Adapter, DC Motors
  • Set of 30 F-F Single Port Pin Connectors